07922 286920

Full & Partial Electrical Rewiring in Doncaster

Need more information on electrical rewiring in Doncaster? There are no set guidelines as to when a property should be rewired. Just because your wiring’s old, it doesn’t mean it’s unsafe. Many factors can affect the wear and tear of your electrical installation, including the materials used and how your property has been used.

We would advise that a periodic inspection is carried out on owner-occupied properties at least every 10 years and every five years in rented accommodation. The test will certify whether the electrics in a property are safe and tell you if anything needs upgrading.

You should carry out regular checks around the house on the condition of your cables, switches, sockets and other accessories. If you notice anything unusual – for example, burn marks on plugs and sockets, sounds of ‘arcing’ (buzzing or crackling), fuses blowing or circuit-breakers tripping – get a registered electrician to check your electrics as soon as possible.

Old or Faulty Wiring Can Cause Death and Disaster

electrical services doncaster
recent project for electrical rewiring in doncaster

Old or faulty wiring is the most common cause of electrical fires so it is important to ensure your wiring is safe at regular intervals. Some people may want to undertake electrical rewiring in Doncaster or upgrade the current system – particularly those moving into a new property which might be 25 years or older. Undertaking a full or partial rewire in a property is a big job and one that should only be carried out by a registered electrician.

When should an electrician carry out a rewire?

All electrical installations, over time, will deteriorate naturally as they are a working mechanism made up of various components and working systems. For wiring systems more than 25 years old we would always recommend having the electrical system checked out at regular intervals. This will help identify any faults or defects which could require improvement. It will also give you an idea of any work that might be required and potential cost if you are considering upgrading the electrical installation or remodelling it to include additional circuits. Full electrical rewiring in Doncaster usually takes place when major building work such as an extension or conversion is being carried out – prior to any plastering or decoration.

Other occasions when a rewire might be necessary include:

After flood or fire damage

Installation of several new circuits

If electrical installation has become unsafe

Upgrade of building/property

What does the work involve?

Carrying out an electrical rewire will require a large amount of disruption to the main fabric of a property. It is likely that all switches, fittings, sockets and the consumer unit will be replaced and require new wiring. A total rewire will involve two stages of working; first fix and second fix. All first fix work will take place before plastering work and, usually, at the same time as any central heating and plumbing work. This is to ensure all cabling is hidden so the installation will involve lifting the floor coverings and floorboards and possibly the skirting boards too, chasing out channels in the walls and possibly in some ceilings that are inaccessible from above.

As well as installing new cabling, first fix stage may involve fitting new back boxes for all sockets and switches. In addition to rewiring for all power and lighting circuits, it is a good opportunity to rewire for modern central heating controls, alarms, smoke detectors and doorbells, to add outdoor lighting and sockets, and to rewire the telephones and television aerial sockets. It is also worth redesigning the wiring plan for sockets and switches to make sure it meets your needs and those of modern house buyers.

ELECSA approved contractor

Second fix
Once the first fix stage has been completed, the property can be re-plastered or the walls and ceilings filled and made good, and the flooring replaced. The second fix work can then proceed fitting sockets and switch plates, light fittings, the consumer unit and wiring any electric fans, cookers, extractor hoods, electric showers and the immersion heater, if there is a hot water storage cylinder.

Partial rewire
A full rewire can be avoided, providing the existing cabling is sound and able to carry any additional loads. It also may be possible to upgrade it by adding a modern consumer unit and upgrading the earthing and bonding.

recent work for electrical rewiring in doncaster
rewiring a house in doncaster
recent electrical rewiring work

What will a new rewire mean?

Having a full rewire will bring the electrical installation in your property up-to-date with the latest wiring regulations. It will also give you the opportunity to modernise your home with a new consumer unit containing residual current devices (RCDs) and circuit breakers, additional sockets to suit your needs (including USB sockets should you so wish) and the most up-to-date, modern wiring available.

It can also be costly and we recommend that you get at least three quotes before arranging for an electrician to carry out a full rewire – as the prices quoted could be markedly different. However, please be aware that the lowest cost does not always mean the best job – so do your research carefully and maybe look at examples of other rewires carried out by the firm you choose to go with.

I am considering a full rewire. What building regulations do I need to be aware of?    

Full electrical rewiring in Doncaster has to be notified to the local building control department so that it meets the appropriate safety standards. Speak to the electrician before any work to upgrade your wiring commences. Find out if the work complies with Part P of the building regulations and that the appropriate notification and certification will be taken care of once the work is completed. A straightforward way of meeting the requirements is to use a registered contractor. They can self-certify the work and notify the local building control department on your behalf.

How long will a full rewire take?
A full rewire can take, on average up to between 5-10 days, depending on the size of the property. The time taken depends on the number of contractors working and the exact scope of work involved.

Contact MCD’s Electrical & Son E PM Ltd

For more information, or a no obligation, free of charge site survey and quotation for electrical rewiring in Doncaster please contact the team at MCD’s Electrical & Son E PM Ltd today.